Product center

IH series of standard chemical pump

product class:Chemical pump series

product name:IH series of standard chemical....

Performance data	Range of capacity	1.8~1450m³/h
	Range of head	≤133m
	Medium temperature	-10℃~120℃
	Ambient temperature	Up to 40℃
	Maximum working pressure	suction pressure+head of pump≤1.6MPa
Motor data	Supporting power
	Voltage	380V
	Frequency	50HZ
	Rotating speed	2900r/min,1450r/min,970r/min
	Protection class	IP44/IP54
	Insulation class	B/F
Material	pump body , pump cover,impeller	cast iron
	Pump shaft	45 steel /stainless stell 3Crl3
	Mechanical seal	silicon carbide,graphite,tungsten carbide,hard alloy and etc.

overview
feature
purpose
Model significance
Show case
data behavioral
Application area

    Series IH chemical pump is radial split and back pull out structure, so there is no need of dismantling the pipeline when check and repair.
    Pump casing is axial suction, radial discharge and supported by foot .Pump is connected with the driver by spacer coupling.
    Bearing are lubricated by clean 22 mechanical oil, bearing housing must be filled with lubricant to about 2mm over the central line of oil level gauge before pump operation.
    Shaft seal adopts packing seal, mechanical seal, vice-impeller seal (dynamic seal)

It is mainly used in oil, chemical industry, synthetic fiber, fertilizer, power plant, metallurgy, food and pharmaceutics, etc .industrial departments to transport corrosive medium without suspended grain or medium which must not be polluted.

IH50-32-160
IH-Series product of internationa standard chemical pump
50-Suction diameter(mm)
32-Discharge diameter(mm)
160-Impeller nominal diameter(mm)